Welcome! Today, I’ll guide you through the process of using the Pet Stain Eraser Power Brush by Bissell. To make things even easier, I’ve created a video tutorial that visually demonstrates each step. You can find the link to the tutorial in the description below. You can also find the cleaner online here: Please note that as an Amazon Associate I may earn from qualified purchases – https://amzn.to/47vmpLg
Understanding the Machine
The Pet Stain Eraser Power Brush comes with essential components, including the power brush, pet stain tool, two 8 oz cleaners, and a charger. Before diving into action, let’s go over the machine together.
Start by charging the device. Simply plug in the charger into the designated port on the machine and leave it to charge for a minimum of 4 hours before your initial use.
On the top of the machine, you’ll find the power button, spray button for applying water and solution, and the agitator button to control the power brush. The power brush can be turned on and off, allowing flexibility in your cleaning process.
Two water reservoirs are located on top and bottom: the clean water reservoir and the dirty water reservoir. The clean water reservoir is easily removable for filling, while the dirty water reservoir has a press-to-release button for efficient disposal.
Changing the Brush and Basic Maintenance
Learn how to switch between the power brush and pet stain brush effortlessly. The process involves aligning the brush with a small cylinder, securing it in place with a cover.
For proper maintenance, the top part, where water is sucked up, can be detached for easy cleaning. This is particularly useful for removing debris and ensuring optimal performance.
Creating a Mess and Cleaning It Up
Let’s put the Pet Stain Eraser to the test! I’ll simulate a mess using some apple juice on the carpet. Before using the carpet cleaner, it’s advisable to blot the mess to remove excess liquid.
Once ready, turn on the machine, suck up any remaining liquid, and apply the cleaning solution by pressing the spray button. Engage the power brush to scrub the stain thoroughly. Repeat this process a few times until the stain is visibly reduced, and the carpet is slightly damp to the touch.
Important Tips and Post-Cleaning Instructions
Remember to use the machine in specific positions as instructed by Bissell – either in an upright or slightly tilted forward position. When removing the dirty water reservoir, ensure the machine is in a vertical position to prevent spills.
After cleaning, take the time to clean each component separately. Avoid squirting water on electronic parts and follow the manufacturer’s guidelines for proper maintenance.
Bissell recommends charging the Pet Stain Eraser for at least 4 hours after each use to ensure it operates optimally. You can find a link to the product in the video description.
If you found this tutorial helpful, please like the video and consider subscribing to the channel for more DIY content. Happy cleaning!
For more about Bissell Products be sure to check out the Bissell Little Green Machine next!